Ipv6 Routing - D-Link DIR-608 User Manual

Section 3 - Configuration
This page allows you to you to define custom IPv6 routes to control how data traffic is moved
around your network.
Destination: This is the IPv6 address of the router used to reach the specified
destination.
Prefix Lenth: Enter the IPv6 address prefix length of the packets that will take this
route.
Next Hop: Enter your next hop gateway to be taken if this route is used.
Interface: Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click the Add Route to add your custom IPv6 route. It will be added to the IPv6 Static
Route Table.
The section displays the current IPv6 Static Route Table.
To delete an IPv6 route, select it from the IPv6 Static Route table and click the Delete
Selected button.
D-Link DIR-608 User Manual

IPv6 Routing

Configuration
IPv6 Static Route Table
DIR-608
Advanced
IPv6 Routing Configuration
IPv6 Routing
Configuration
Destination
Prefix Length
Next Hop
Interface
Add Route Delete Selected
IPv6 Static Route Table
Select Destination NextHop
Maintenance
▼
Interface
74