Traffic Control - D-Link DIR-608 User Manual

Section 3 - Configuration
This page allows you to configure traffic bandwidth and rules for network traffic.
Total Bandwidth Enter the total bandwidth provided by your ISP's service contract in
(0, Unlimited): kbps for uploading and downloading.
Auto Traffic Click to enable auto traffic shaping.
Shaping:
Click the Apply Changes button to save any changes made.
The section displays the currently defined Quality of Service (QoS) rules.
To delete an existing QoS rule, select a configuration in the table and click the Delete button.
To add a rule, click the Add button. The following rule creation options will appear:
Protocol: Select the data protocol which you want to set a QoS rule for.
Source IP: Enter the source IP.
Dest IP: Enter the destination IP.
Source Port: Enter the source port number if applicable.
Up Floor: Enter the minimum upload speed.
Down Floor: Enter the minimum download speed.
D-Link DIR-608 User Manual

Traffic Control

Traffic Control
QoS Rules
DIR-608
Advanced
Traffic Control
Traffic Control
Traffic Control
Total Bandwidth UP Stream
kbps
(0, Unlimited):
☐
Auto Traffic Shaping
Apply
QoS Rules
Guaranteed
Bandwith
Source Dest Source
Protocol Dest IP
Port Port IP
Up
Floor
Add Delete
Protocol: None ▼
Source
Source IP:
Netmask:
Dest IP: Dest Netmask:
Source Port: Dest Port:
Up Floor: kb/s Up Ceiling:
Down Floor: kb/s Down Ceiling:
Maintenance
Down Stream
0 0
kbps
Max
Bandwidth
(Kbps)
Delete
Down Up Down
Floor Ceiling Ceiling
☐
kb/s
kb/s
67