Section 3 - Configuration
This page allows you to configure wireless repeater settings for the DIR-608.
Check the box and click the Apply button in order to enable the
Repeater Enabled:
Wireless Repeater function. Repeater function is disabled by default.
SSID of AP:
If repeater mode is enabled, the name of the host network that is
being repeated is displayed here.
Click the Site Survey button to enable the router to search for nearby
wireless networks. This will take about 5 seconds.
Refer to Wireless Repeater Setup on page 58 for instructions on how to enable the
Wireless Repeater Functionality.
D-Link DIR-608 User Manual
Wireless Repeater
Wireless Repeater Setup
DIR-608
Wireless
Wireless Repeater
Wireless Repeater
Wireless Repeater Setup
Repeater
☐
mode will be set to 'none'
if the repeater is
SSID of AP
Site Survey
Apply
Advanced
Enabled(DHCP
enabled)
57