D-Link DIR-608 User Manual page 25

Section 3 - Configuration
If you choose PPPoE, please configure the following fields and click Next.
Enter the account username and password provided by your ISP.
User Name: Enter your username.
Password: Enter your password.
Confirm Password:
Enter your password again.
Account Validate:
Test that your PPPoE username and password are correct.
Next:
Proceed to the next step.
Back:
Go back to the last step.
If you choose Static IP, please configure the following fields and click Next.
Enter the account username and password provided by your ISP.
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask.
Default Gateway: Enter the default gateway.
Primary DNS: Enter the primary DNS address.
Secondary DNS:
Enter the secondary DNS address.
D-Link DIR-608 User Manual
Wizard (continued)
Easy Setup - PPPoE
Easy Setup - Static IP
Easy Setup - PPPoE
Enter the account username and password provided by your
ISP.
User Name:
Password:
Confirm Password:
Account Validate
Easy Setup - Static IP
Enter the IP parameters provided by your ISP.
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
Back Next
(Optional)
Back Next
21