Time And Date - D-Link DIR-608 User Manual

Section 3 - Configuration
This page allows you to edit the system time and Network Time Protocol (NTP). You can
configure, update, and maintain the correct time on the system clock, and configure Daylight
Saving.
System Time: Enter the correct year, month, day, and time.
Daylight Saving Select the daylight saving offset if Daylight Saving time will be used.
Offset:
Click the Apply Changes button to save any changes made.
State:
Choose to enable or disable the NTP client.
Server:
Enter the address of the NTP server to connect to.
Server2:
Enter the address of a second NTP server to connect to.
Interval:
Enter the time period that you want the NTP server to synchronize
time with the devices on the network. The default value is one hour.
Time Zone: Select the time zone you are in from the dropdown menu.
GMT Time: This shows the current GMT (Greenwich Mean Time) time.
Click the Apply Changes button to save any changes made.
NTP Start: To update the current time using NTP, click the Get GMT Time button.
D-Link DIR-608 User Manual

Time and Date

System Time
NTP Configuration:
Start NTP:
DIR-608
Maintenance
System Time Configuration
Time and Date
System Time
System Time: 2016 Year Jul
16 Hour 09 min
Daylight Saving Offset:
0:00
Apply Changes
NTP Configuration:
State: Disable Enable
Server: ntp1.dlink.com
Server2:
Interval: Every 1
Time Zone: (GMT+08:00) China, Hong Kong, Taipei
GMT time: Tue July 5 16:09:10 2016
Apply Changes
Start NTP:
NTP Start: Get GMT Time
Status
▼ Month 5 Day
16 sec
▼
Reset
hours
▼
Reset
80