Table of Contents
Advertisement
Section 3 - Configuration
This page allows you to specify custom routes that determine how data is moved around your network.
Route List:
Check the box next to the route you wish to enable.
Name:
Enter a specific name to identify this route.
Destination IP/
This is the IP address of the router used to reach
Prefix Length:
the specified destination or enter the IPv6 address
prefix length of the packets that will take this route.
Metric:
Enter the metric value for this rule here.
Interface:
Use the drop-down menu to specify if the IP packet
must use the WAN or LAN interface to transit out
of the Router.
Gateway:
Enter the next hop that will be taken if this route
is used.
D-Link DIR-645L User Manual
IPv6 Routing
103
Advertisement
Table of Contents
