D-Link DIR-608 User Manual page 42

Section 3 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE
My IPv6
Connection is: username and password in order to connect to the Internet.
User Name: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Service Name: Enter the ISP service name (optional).
Idle Time: Set the connection time out length. (Connect on Demand only)
MTU Size: Enter the MTU size.
Select either Continuous, Connect on Demand, or Manual.
Connection Type:
Select either Obtain DNS server address automatically or Use the following DNS address.
If you choose Use the following DNS address, please configure the following field:
Primary DNS Enter the primary DNS server address.
Address:
Secondary DNS
Enter the secondary DNS server address.
Address:
D-Link DIR-608 User Manual
IPv6 Connection Type
PPPoE:
IPv6 DNS Settings
PPPoE
IPv6 Connection Type:
Choose the mode to be used by the router to the IPv6
Internet.
PPPoE
Enter the information provided by your Internet Service
Provider (ISP).
IPv6 DNS Settings
Obtain DNS server address automatically or enter a
specific DNS server address.
Obtain DNS server address
My IPv6 Connection is: PPPoE
User Name:
Password:
Service Name:
Idle Time: 5
MTU Size: 1452
Connection Type:
Connect on Demand
connect
automatically
Use the following DNS
address
Primary DNS Address:
Secondary DNS Address:
▼
(1-1000
minutes)
▼
disconnect
38