D-Link DIR-608 User Manual page 30

Section 3 - Configuration
DHCP Static IP Configuration
If you want a computer or device to always have the same IP address assigned, you can create
a DHCP reservation. The router will assign the IP address only to that computer or device.
IP Address: Enter the IP address you want to assign to the computer or device.
This IP Address must be outside the DHCP IP Address Range.
MAC Address: Enter the MAC address of the computer or device.
When you have finished configuring the new DHCP Reservation, click the Add button to
activate your reservation. It will then be displayed in the DHCP Static IP Table below.
The DHCP Static IP Table displays the IP reservations that have been created. To make
any changes, select a reservation in the table by clicking the circle next to it and click
Update. To delete a reservation, select a reservation and click Delete Selected.
When you have finished configuring the Local Network, click the Apply Changes button.
D-Link DIR-608 User Manual
Local Network (continued)
DHCP Static IP Table
DHCP Static IP Configuration
IP Address: 0.0.0.0
Mac address:
000000000000
Delete Selected Add
DHCP Static IP Configuration
Select IP Address
192.168.11.14
Update Reset
MAC Address
00:00:40:30:05:70
26