D-Link DIR-608 User Manual page 29

Section 3 - Configuration
This section allows you to configure the local network and DHCP settings of your device. The
DHCP service supplies IP settings to clients configured to automatically obtain IP settings
that are connected to the device through the Ethernet port.
DHCP Mode: Choose the DHCP Server option in the pulldown menu to enable the
DHCP server on your router. Choose None to disable this function.
IP Pool Range: Enter the starting and ending IP addresses for the DHCP server's IP
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conflict.
Max Lease Time: The maximum length of time for the IP address lease. Enter the Lease
time in minutes.
Domain Name: Enter the domain name.
DNS Server 1: Enter the IP address of the first DNS Server.
DNS Server 2: Enter the IP address of the second DNS Server, if there is one.
DNS Server 3: Enter the IP address of the second DNS Server, if there is one.
D-Link DIR-608 User Manual
Local Network (continued)
DHCP Server Settings
DHCP Server Settings
DHCP Mode: DHCP Server
IP Pool Range: 192.168.11.2
Max Lease Time: 120
Domain Name: domain.name
DNS Server 1: 192.168.11.1
DNS Server 2:
DNS Server 3:
Apply Changes
▼
- 192.168.11.254
minutes
Undo
25