D-Link DIR-608 User Manual page 38

Section 3 - Configuration
Select Static IP if your IPv6 information is provided by your ISP.
My IPv6
Connection is:
WAN IPv6 Address Settings
IPv6 Address: Enter the address supplied by your ISP.
Subnet Prefix Enter the subnet prefix length supplied by your ISP.
Length:
Default Gateway: Enter the default gateway for your IPv6 connection.
Primary DNS
Enter the primary DNS server address.
Address:
Secondary DNS
Enter the secondary DNS server address.
Address:
LAN IPv6 Address Settings
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
D-Link DIR-608 User Manual
IPv6 Connection Type
IPv6 DNS Settings
Static IP
IPv6 Connection Type:
Choose the mode to be used by the router to the IPv6
Internet.
WAN IPv6 Address Settings
Enter the IPv6 address information provided by your
Internet Service Provider (ISP).
IPv6 DNS Settings
Obtain DNS server address automatically or enter a
specific DNS server address.
LAN IPv6 Address Settings
Use this section to configure the internal network settings of
your router. If you change the LAN IPv6 Address here, you
may need to adjust your PC's network settings to access the
network again.
My IPv6 Connection is: Static IP
IPv6 Address:
Subnet Prefix Length:
64
Default Gateway:
Primary DNS Address:
Secondary DNS Address:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address: xx00:yy11:zz22:123/64
▼
/64
34