D-Link DIR-608 User Manual page 77

Section 3 - Configuration
DPort: Enter the destination port range, if applicable.
Enable: Check this box to enable the rule.
Click the Apply Changes to add your IPv6 filter.
The section displays the current IPv6 Filter Rules.
To enable or disable an IPv6 route filter, click its disable or enable button from the Action
column.
To delete an IPv6 route filter, select it form the table and click the Delete button.
D-Link DIR-608 User Manual
IPv6 Filter (continued)
Current Filter Table
Rule Configuration
Rule
Permit Deny
Action:
Protocol: IPv6
▼
Direction: Upstream
▼
Source
IPv6
Length:
Address:
Dest IPv6
Address: Length:
SPort: -
☑
Enable:
Apply Changes Reset
Current Filter Table
Source Dest IPv6/
Rule Protocol SPort DPort
IPv6/Prefix Prefix
deny ip6 eeee: any 50
deny ip6 ffff:: any
Icmp6
PING6
▼
Type:
Prefix
Prefix
DPort: -
Help
Icmp6
State Direction Action
Type:
enable
disable Downstream
Delete
disable
enable Upstream
Delete
73