D-Link DIR-608 User Manual page 40

Section 3 - Configuration
Select SLAAC/DHCPv6 if your ISP assigns your IPv6 address when
My IPv6
Connection is: your router requests one from the ISP's server. Some ISPs require you
to adjust settings on your side before your router can connect to the
IPv6 Internet.
Select either Obtain DNS server address automatically or Use the following DNS address.
If you choose Use the following DNS address, please configure the following field:
Primary DNS Enter the primary DNS server address.
Address:
Secondary DNS Enter the secondary DNS server address.
Address:
LAN IPv6 Address Settings
Enable DHCP-PD:
Check this box to enable DHCP-PD.
LAN IPv6 Address:
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
router.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
D-Link DIR-608 User Manual
SLAAC/DHCPv6
IPv6 Connection Type
IPv6 DNS Settings
IPv6 Connection Type:
Choose the mode to be used by the router to the IPv6
Internet.
My IPv6 Connection is: SLACC/DHCPv6
IPv6 DNS Settings
Obtain DNS server address automatically or enter a
specific DNS server address.
Obtain DNS server address
automatically
Use the following DNS
address
Primary DNS Address:
Secondary DNS Address:
LAN IPv6 Address Settings
Use this section to configure the internal network settings of
your router. If you change the LAN IPv6 Address here, you
may need to adjust your PC's network settings to access the
network again.
☑
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address: xx00:yy11:zz22:123/64
▼
/64
36