Reporting Non-Hpe Transceiver Modules; Symptom - HPE FlexNetwork 10500 SERIES Troubleshooting Manual

b. Execute the display transceiver interface and display transceiver diagnosis
interface commands to display the value ranges for the optical powers of the transceiver
module.
If the value range in the output from the display transceiver interface command is
different than the display transceiver diagnosis interface command, the smaller range
takes effect.
The output from the display transceiver diagnosis interface command also displays the
current temperature, voltage, bias current, and the value ranges for these parameters.
<Sysname> display transceiver interface Ten-GigabitEthernet 1/2/0/15
Ten-GigabitEthernet1/2/0/15 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(km)
Digital Diagnostic Monitoring : YES
Vendor Name
<Sysname> display transceiver diagnosis interface Ten-GigabitEthernet 1/2/0/15
Ten-GigabitEthernet1/2/0/15 transceiver diagnostic information:
Current diagnostic parameters:
Alarm thresholds:
3. Verify that the transceiver module, peer device, and intermediate link are operating correctly.
4. If the problem persists, contact Hewlett Packard Enterprise Support.

Reporting non-HPE transceiver modules

Symptom

When you use the display logbuffer command to view the system logs, the following reports about
non-HPE transceiver modules appear in the system logs:
<Sysname> display logbuffer
%Oct 17 21:37:24:812 2011 nl-denbo-ro01 OPTMOD/4/PHONY_MODULE:
-Chassis=2-Slot=3;
therefore shall NOT guarantee the normal function of the device or assume the maintenance
responsibility thereof!
Temp.(°C) Voltage(V)
41 3.26
Temp.(°C) Voltage(V)
43 3.35
Temp.(°C) Voltage(V)
High 73 3.80
Low -3 2.81
GigabitEthernet2/3/0/5: This transceiver is NOT sold by HPE. HPE
Bias(mA) RX power(dBM)
42.43 -40.00
: 10G_BASE_SR_SFP
: LC
: 850
: 80(50um),20(62.5um),300(om3)
: FINISAR CORP.
Bias(mA) RX power(dBM)
46.33 -3.60
Bias(mA) RX power(dBM)
92.40 2.50
1.00 -16.40
47
TX power(dBM)
-2.20
TX power(dBM
-2.38
TX power(dBM
3.50
-11.20