Service Module Assignment Failure; Symptom; Troubleshooting Flowchart; Solution - HPE FlexNetwork 10500 SERIES Troubleshooting Manual

Service module assignment failure

Symptom

The location command fails to assign a service module to an MDC.

Troubleshooting flowchart

Figure 29 Troubleshooting service module assignment failure
Service module assignment failure
Resources sufficient?
Yes
The module belongs to
another MDC?
No
Contact the support

Solution

Typical service module assignment failure reasons include:
•
The available hardware resources are insufficient.
•
The service module belongs to another MDC. A service module can belong to only one MDC.
Before you assign a service module to a non-default MDC, you must remove the existing
assignment of the service module.
To resolve the problem:
1. Display the CPU, disk space, and memory space resources for MDCs.
[Sysname]display mdc resource
Memory:
chassis 3 Slot 3:
Used 35.2MB, Free 1279.5MB, Total 1314.7MB:
ID
----------------------------------------------------------------
1
chassis 3 Slot 6:
Used 34.0MB, Free 1280.7MB, Total 1314.7MB:
ID
----------------------------------------------------------------
1
chassis 3 Slot 7:
Used 34.0MB, Free 1284.7MB, Total 1318.7MB:
No
Re-assign resources
Yes
Reclaim the module
Name Quota(MB)
Admin 1314.7
Name Quota(MB)
Admin 1314.7
Resolved?
No
Resolved?
No
Used(MB)
35.2
Used(MB)
34.0
77
Yes
Yes
End
Available(MB)
1279.5
Available(MB)
1280.7