HPE FlexNetwork 10500 SERIES Troubleshooting Manual page 82

ID Name
----------------------------------------------------------------
1 Admin
chassis 3 Slot 0:
Used 583.5MB, Free 7289.1MB, Total 7872.6MB:
ID Name
----------------------------------------------------------------
1 Admin
2 mdcA
CPU:
chassis 3 Slot 3:
ID Name
-------------------------------------------------
1 Admin
chassis 3 Slot 6:
ID Name
-------------------------------------------------
1 Admin
chassis 3 Slot 7:
ID Name
-------------------------------------------------
1 Admin
chassis 3 Slot 0:
ID Name
-------------------------------------------------
1 Admin
2 mdcA
Disk:
chassis 3 Slot 0:
flash:: Used 474.1MB, Free 17.9MB, Total 492.0MB:
ID Name
--------------------------------------------------------------
1 Admin
2 mdcA
2. If the CPU, disk space, or memory space resources assigned to an MDC are insufficient,
re-assign resources to the MDC. (Details not shown.)
3. Display the MDC to which the service module belongs. In this example, the service module is
installed in slot 3 of member device 3. The service module is required to be assigned to mdcB.
If the output is as follows, the undo location command has not been executed for any service
modules on the default MDC, and all service modules belong to the default MDC:
[Sysname]mdc Admin
[Sysname-mdc-1-Admin]display this
#
mdc Admin id 1
#
Return
If the output is as follows, the service module belongs to mdcA:
[Sysname-mdc-2-mdcA]display this
#
Quota(MB) Used(MB)
1318.7 34.0
Quota(MB) Used(MB)
7872.6 583.5
7872.6 0.0
Weight Usage(%)
10 7
Weight Usage(%)
10 0
Weight Usage(%)
10 1
Weight Usage(%)
10 0
10 0
Quota(MB) Used(MB)
492.0 474.1
492.0 0.0
78
Available(MB)
1284.7
Available(MB)
7289.1
7289.1
Available(MB)
17.9
17.9