HPE FlexNetwork 10500 SERIES Troubleshooting Manual page 13

command-alias enable
command-alias mapping undo no
command-alias mapping quit exit
command-alias mapping return end
#
password-recovery enable
#
•
View the bootstrap information displayed when you access the extended BootWare menu. If the
message "Password recovery capability is enabled." is displayed, password recovery capability
is enabled.
Changing the console login password when password recovery capability is enabled
1. Connect a configuration terminal to the console port of the device.
2. Power on the device.
RAM test successful.
Press Ctrl+T to start five-step full RAM test...
Press Ctrl+Y to start nine-step full RAM test...
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
*
*
*
****************************************************************************
Compiled Date
CPU Type
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
BASIC CPLD Version
EXTENDED CPLD Version : 003
PCB Version
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
3. Press Ctrl + B within three seconds after the "Press Ctrl+B to access
EXTENDED-BOOTWARE MENU..." prompt message appears.
The extended BootWare menu is displayed:
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
BootWare, Version 1.08
: Dec 9 2014
: XLP208
: 1000MHz
: DDR3 SDRAM
: 8192MB
: 667MHz
: 1536KB
: 4MB
: 000A
: Ver.A
9
*
*
*