General Safety Instructions - Samson 3374 Mounting And Operating Instructions

1

General safety instructions

For your own safety, follow these instructions concerning the mounting, start up and opera-
tion of the actuator:
− The actuator is to be mounted, started up or operated only by trained and experienced
personnel familiar with the product. According to these mounting and operating instruc-
tions, trained personnel refers to individuals who are able to judge the work they are as-
signed to and recognize possible dangers due to their specialized training, their knowl-
edge and experience as well as their knowledge of the applicable standards.
− Any hazards that could be caused in the valve by the process medium and the operating
pressure or by moving parts are to be prevented by taking appropriate precautions.
− The actuator is designed for use in low voltage installations. For wiring and maintenance,
you are required to observe the relevant safety regulations. Only use protective equip-
ment in which the power supply cannot be reconnected inadvertently.
− Before wiring the actuator, disconnect it from the power supply.
To avoid damage to any equipment, the following also applies:
− Proper shipping and storage are assumed.
Note:

Devices with a CE marking fulfill the requirements of the Directives 2004/30/EU and
2014/35/EU.
The Declaration of Conformity is available on request.
EB 8331-4 EN
General safety instructions
7