10.2 Rotary pushbutton
The rotary pushbutton is used for on-site operation of the actuator.
Turn
:
Press
:
NOTICE
Changed parameters are immediately effective!
The process is directly affected by these changes.
First check any changes made to parameters before confirming them by pressing the
rotary pushbutton.
10.2.1 Menu control
EB 8331-4 EN
Select/change codes and values
Confirm setting/change
Activate level/parameter
( indicates a jump to another level with further options)
Turn à Required code
Press à Confirm. Code is selected.
Example shown: Configuration level Code 10 selected
Setting parameters
Press (blinking display)
Turn à Required setting
Press à Setting is saved
Example shown: Speed level Code c64 set to NORM.
Exit level
Press à Exit level.
Example shown: Information level exited.
Operating controls
27