Shift-Up Indicator (Sti Without Gear Shift Indicator Models); Select Lever/Gear Position Indicator (If Equipped); Turn Signal Indicator Lights; High Beam Indicator Light - Subaru WRX-STI Owner's Manual

&
Shift-up indicator (STI
without gear shift indi-
cator models)
While driving, this indicator appears and
informs the driver about the upshift timing
for fuel-efficient driving.
The shift-up indicator can be activated or
deactivated.
Refer to Gear Position Indicator Setting
(MT without gear shift indicator models)
F3-46.
Instruments and controls/Warning and indicator lights
& Select lever/gear position in-
dicator (if equipped)
1) Upshift indicator
2) Downshift indicator
3) Select lever/gear position indicator
This indicator shows the position of the
shift lever (MT models)/select lever (CVT
models).
For CVT models with manual mode, when
the manual mode is selected, the gear
position indicator (which shows the cur-
rent gear selection) and the upshift/down-
shift indicator appear. Refer to Selection
of manual mode F7-22.
! Gear shift indicator (if equipped)
When shifting up is recommended for
good fuel economy, the upshift indicator
blinks. When shifting down is recom-
mended, the downshift indicator blinks.
NOTE
The gear shift indicator cannot be
deactivated.
&
Turn signal indicator
lights
These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to Low beam headlight (models
without LED headlights), position light
(models without LED headlights) and front
turn signal light F11-49 or Rear combi-
nation lights F11-53.
&
High beam indicator
light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.
– CONTINUED –
3-33