How To Bring Up The Side View Monitor; How To Cancel The Side View Monitor - Subaru WRX-STI Owner's Manual

6-18
Interior equipment/Side View Monitor
person or object on the screen is
different from the actual view in
terms of position and distance.
. Do not place too much confi-
dence in the Side View Monitor
system. Drive the vehicle care-
fully and as you would do with a
vehicle without the Side View
Monitor.
. Never rely on only the Side View
Monitor when driving the vehicle.
The image on the monitor screen
may be different from the actual
situation. If you drive the vehicle
by viewing only the monitor im-
age, a collision or an unexpected
accident may occur. When driv-
ing the vehicle, always check the
safety around the vehicle directly
with your eyes and the mirrors.
. Do not use the Side View Monitor
in the following situations.
– The outside mirrors are re-
tracted.
– The passenger side door is
not fully closed.
. If the outside temperature is low,
the monitor screen may become
dark or the image may become
dim. In particular, the image of a
moving object may be distorted
or disappear from the screen.
You must always check the
safety around the vehicle directly
with your eyes when driving it.
& How to bring up the Side
View Monitor
1) SVM/ENTER button
When the ignition switch is in the ON
position, perform the following operations
to change over to the camera screen.
. Press the SVM/ENTER
. Set the shift lever (MT models)/select
lever (CVT models) to the R position
when the reverse interlock function is on.
*1: When the multi function display shows
screens other than the basic screen, it
does not switch to the camera image.
*2: The reverse interlock function can be
switched on or off. Refer to Side View
Monitor function setting F3-79.
& How to cancel the Side View
Monitor
! When the Side View Monitor is
activated using the SVM/ENTER
button
! Manual cancellation of the Side
View Monitor
Press the SVM/ENTER
again.
! Automatic cancellation of the
Side View Monitor
If any of the following conditions are met,
the Side View Monitor is canceled auto-
matically.
. Approximately 3 minutes have passed
since the last operation.
. Vehicle speed becomes 20 km/h (12.5
mph) or more*.
*1
button.
. The select lever (CVT models) is
shifted to the P position.
. The parking brake is applied.
*2
*: The Side View Monitor can be activated
when the SVM/ENTER
button
button is