Subaru WRX-STI Owner's Manual page 222

3-94
Instruments and controls/Light control switch
! Headlight off delay setting
The headlight off delay function turns on
the headlights, etc. for smooth exiting from
the vehicle at night or in a dark place.
NOTE
The factory setting (default setting) of
the operation duration of the headlights
and the exterior lights is 30 seconds.
This setting can be changed to OFF (no
operation), 30 seconds, 60 seconds, or
90 seconds at SUBARU dealers. For
more details, we recommend that you
contact a SUBARU dealer.
When the ignition switch is turned off and
the light control switch is in the AUTO (if
equipped) or OFF position, if you pull the
turn signal lever toward you, the headlight
low beams and some exterior lights will
illuminate as follows.
. Illuminates for 30 seconds after the
driver s door is closed.
. Illuminates until you press the lock
button on the access key/transmitter two
times successively.
. Illuminates until you touch the door lock
sensor on the door handle two times
successively (models with keyless ac-
cess with push-button start system ).
NOTE
. While the headlight off delay func-
tion is operating, if you perform any of
the following operations, the head-
lights and exterior lights will turn off.
– Turn the ignition switch to the
"ON" position.
– Pull the turn signal lever toward
you.
– Set the light control switch to a
position other than the "AUTO" (if
equipped) or "OFF" position.
. If the driver's door is not opened
and closed, these lights will turn off in 3
minutes.
! Sensor for the auto on/off head-
lights (rain light sensor) (if
equipped)
The sensor is on the windshield glass as
shown in the illustration.
CAUTION
If any object is attached on or near
the sensor, the sensor may not
detect the level of ambient light
correctly and the auto on/off head-
lights may not operate properly.