Light Control Switch - Subaru WRX-STI Owner's Manual

3-92
Instruments and controls/Light control switch
7. The system will notify you that the
setting is complete.

Light control switch

CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch
is turned to the off position. If the
vehicle is left unattended for a
long time with the light control
switch set to a position other
than the off position, the battery
may be discharged.
Models with "keyless access with
push-button start system":
The light control switch operates when the
push-button ignition switch is in the ACC
or ON position.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the push-button ignition
switch is turned off.
Models without "keyless access with
push-button start system":
The light control switch operates when the
key is inserted in the ignition switch.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the key is removed from
the ignition switch.
NOTE
The light control switch can be oper-
ated (except auto on/off headlights),
even under the following conditions.
. when the key is not inserted into the
ignition switch (models without "key-
less access with push-button start
system")
. when the push-button ignition
switch is turned off (models with "key-
less access with push-button start
system")
If the driver's door is opened while the
headlights are illuminated under such
conditions, the chirp sound will inform
the driver that the lights are illumi-
nated.