Initialize - Subaru WRX-STI Owner's Manual

3. The current setting will be displayed.
Push the button to enter the selection
mode.
4. Select the preferred setting by operat-
ing the or switch, and then push
the button.
5. Select Set by operating the
switch, and confirm the setting by pushing
the button.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
Instruments and controls/Multi function display
& Initialize
Items that have been set to your pre-
ference can be initialized. To select an
initialization menu, operate the
switch as follows.
! Preparation for initialization
1. Turn the ignition switch to the ON
position.
2. Push and hold the
the selection screen.
3-89
or
button to show
– CONTINUED –