3-86
Instruments and controls/Multi function display
5. Select Set by operating the
switch, and confirm the setting by pushing
the
button.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
! Security Relocking
1. Perform the preparation steps accord-
ing to Preparation for car settings F3-85.
2. Operate the
or
select the Security Relocking item, and
then push the
3. The current setting will be displayed.
Push the
mode.
switch to
4. Select the preferred setting by operat-
ing the
or
button.
button to enter the selection
switch, and then push