Range Of Image On Screen - Subaru WRX-STI Owner's Manual

pressed, regardless of the vehicle speed.
! When the image is turned on using
the reverse interlock function
! Manual cancellation of the Side
View Monitor
Press the SVM/ENTER
again.
! Automatic cancellation of the
Side View Monitor
If any of the following conditions are met,
the Side View Monitor is canceled auto-
matically.
. The parking brake is applied.
. Vehicle speed becomes 8 km/h (5
mph) or more.
. The select lever (CVT models) is
shifted from the R position to the P
position.
. Approximately 9 seconds have passed
since shifting the shift lever from the R
position (MT models), or the select lever
from the R position to a position other
than the P position (CVT models).
& Range of image on screen
button
Range of displayed image
WARNING
Because the range of the image
captured by the camera is limited,
Interior equipment/Side View Monitor
always check the safety around the
vehicle directly with your eyes when
driving the vehicle.
NOTE
. The range of the displayed image
may differ depending on the vehicle
status or the road surface status.
. Because the Side View Monitor
system uses a specially designed lens,
the sense of distance in the displayed
image is different from the actual
distance.
. The camera image may be difficult
to view in the following situations. This
is not a malfunction.
– Dark place (at night)
– High or low temperature around
the lens
– Water contacts lens or in high
humidity (rainy weather)
– There is foreign materials (such
as mud) around the camera
– Sunlight or headlight beam di-
rectly shines towards the camera
lens
. Under an artificial light such as a
fluorescent lamp, sodium-vapor lamp
or mercury lamp, the lighted portion
may look like it is flickering (flicker
phenomenon).
– CONTINUED –
6-19