Subaru WRX-STI Owner's Manual page 158

Table of Contents

Advertisement

3-30
Instruments and controls/Warning and indicator lights
Inside warning
Outside warning
chime
chime
Long beep (60
Ding
seconds max.)
Ding, ding ...
(7 seconds)
Ding
Beep, beep, beep
Ding
(3 beeps)
Beep, beep, beep
Ding
(3 beeps)
Long beep
Long beep
(continuous)
(continuous)
Operation indicator
on push-button igni-
tion switch
Power warning:
The door lock sensor is touched while
carrying the access key and the push-
button ignition switch is in a position
other than OFF (in CVT models, when
the select lever is in the P position).
Access key warning:
The vehicle is driven while the access
key is not inside the vehicle.
Access key warning for engine start:
The push-button ignition switch is
pressed while the access key is not
inside the vehicle.
Access key takeout warning:
The driver exited the vehicle with the
access key and closed the driver s door
while the push-button ignition switch is in
a position other than OFF (in CVT
models, when the select lever is in the
P position).
Passenger access key takeout warn-
ing:
A fellow passenger exited the vehicle
with the access key and closed a door
other than the driver s door while the
push-button ignition switch is in a posi-
tion other than OFF .
The driver exited the vehicle with the
access key and closed the driver s door
while the push-button ignition switch is in
a position other than OFF (all models)
and the select lever is in a position other
than the P position (CVT models).
Status
Open the door and return the access key
inside the vehicle, or switch the push-
button ignition switch to OFF .
*If the push-button ignition switch is not
switched to OFF , the doors cannot be
locked.
Carry the access key, and drive the
vehicle.
Carry the access key, and press the
push-button ignition switch.
Switch the push-button ignition switch to
OFF , and get out of the vehicle.
Return the access key to inside the
vehicle, or switch the push-button igni-
tion switch to OFF .
Shift the select lever to the P position
(CVT models), switch the push-button
ignition switch to OFF (all models) and
exit the vehicle.
Action

Advertisement

Table of Contents
loading

Table of Contents