To Temporarily Cancel The Cruise Control - Subaru WRX-STI Owner's Manual

7-46
Starting and operating/Cruise control
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Press the RES/SET switch to the
SET side and release it. Then release
the accelerator pedal.
At this time, the cruise control set indicator
appears in the combination meter.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
NOTE
For CVT models, when you set the
desired speed while the Sport Sharp
(S#) mode is selected, the select lever/
gear position indicator will change
from the current gear position indica-
tion to the "D" indication.
& To temporarily cancel the
cruise control
The cruise control can be temporarily
canceled in the following ways.
. Press the CANCEL button.
. Depress the brake pedal.
. Depress the clutch pedal (MT models
only).
WARNING
For CVT models, you can cancel the
cruise control by shifting the select
lever into the "N" position. However,
do not shift the lever into the "N"
position while driving except in case
of emergency. If the select lever is
shifted into the "N" position, the
engine brake will no longer work.
This could result in an accident.
The cruise control set indicator in the
combination meter disappears when the