Rear Combination Lights; License Plate Light - Subaru WRX-STI Owner's Manual

mud guard.
& Rear combination lights
1. Remove the clips from the trunk trim
with a flat-head screwdriver.
2. Open the rear portion of the trunk trim
panel as illustrated.
NOTE
Make sure that the " " part of the trunk
*
trim in the illustration does not contact
the trunk lid stay. If the " " part is bent,
*
the trunk trim may be torn.
1) Backup light
2) Rear turn signal light
3. Remove the bulb socket from the rear
combination light assembly by turning it
counterclockwise.
4. Pull the bulb out of the bulb socket and
replace it with a new one.
5. Set the bulb socket into the rear
combination light assembly and turn it
clockwise until it locks.
Maintenance and service/Replacing bulbs
6. Secure the rear trunk trim panel with
the clips.
& License plate light
1. Open the trunk and remove the clips
from the trunk lid trim with a flat-head
screwdriver.
2. Turn over the trunk lid trim.
11-53
– CONTINUED –