Subaru WRX-STI Owner's Manual page 34

1-6
Seat, seatbelt and SRS airbags/Front seats
OFF position.
. The select lever is in the P position
(CVT models) or the shift lever is in the
neutral position (MT models).
2. While pressing the SET button, press
and hold the desired button 1 or 2 .
A chirp sounds once, and the seat position
is registered.
! Registration of seat position with
each access key (if equipped)
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the LOCK /
OFF position.
. The select lever is in the P position
(CVT models) or the shift lever is in the
neutral position (MT models).
2. While holding the access key and
pressing the SET button, press the
button of the access key.
A chirp sounds once, and the seat position
is registered.
! Retrieval of seat position regis-
tered with button "1" or "2"
WARNING
Be sure to press the correct button
to retrieve your registered seat
position. If the seat position is not
optimum for you, it may adversely
affect your driving and may reduce
the effectiveness of the seatbelt.
That could result in an accident
involving serious injury or death.
1. Turn the ignition switch to the ON
position.
2. While the select lever is in the P
position (CVT models) or the shift lever is
in the neutral position (MT models) and
then the parking brake is applied, press
button 1 or 2 .
A chirp sounds and the seat moves to the
registered position.
When the seat moves to the registered
position, a chirp will sound.