Subaru WRX-STI Owner's Manual page 215

the button.
5. Select Set by operating the
switch, and confirm the setting by pushing
the button.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
! Defogger setting
1. Perform the preparation steps accord-
ing to Preparation for car settings F3-85.
Instruments and controls/Multi function display
2. Operate the
select the Defogger item, and then push
the button.
3. The current setting will be displayed.
Push the button to enter the selection
mode.
3-87
or switch to
– CONTINUED –