Control Screen - Subaru WRX-STI Owner's Manual

5-48
Audio/Hands–free phone system
fan is loud.
– There is a negative effect on
sound quality due to the phone
and/or network being used.
. When another phone is connected,
the following registered data cannot be
read:
– Contact data
– Call history data
– All phone settings
. When selling or disposing of the
vehicle, initialize the data. Refer to
"Unit settings" F5-17.
. Once initialized, the data and set-
tings will be erased. Take extra caution
when initializing the data.
. The voice command system sup-
ports phone commands, so dialing a
phone number using your voice is
possible. Refer to "Voice command
system" F5-62.
. The images shown in this Owner's
Manual are sample images. The actual
images and displayed messages may
vary depending on the market and
specifications of your vehicle.
& Control screen
Phone (menu) screen
Phone (dialpad) screen
No. Function
&
Open the Incoming Calls screen.
1 Refer to By incoming calls F5-50.
&
Open the Outgoing Calls screen.
2
Refer to By outgoing calls F5-51.
&
Open the Contacts screen. Refer to
3
By contacts list F5-51.
Changes the screen from the Menu
&
screen to the dialpad screen. Refer to
4
By dialpad F5-52.
Open the phone volume setting
&
screen. Refer to Phone volume set-
5
tings F5-55.
Use to make a phone call. You cannot
&
press this key until you open the
6
dialpad screen and enter a phone
number.
Open the BT Devices Connection
&
screen. Refer to Setting Bluetooth
7
details F5-45.
&
Enter the phone number that you
8
want to call.
& Switch the screen to the Phone
9
(Menu) screen.
NOTE
When the cell phone is not registered
and the Bluetooth setting is off, a
message is displayed instead of menu
items.