Subaru WRX-STI Owner's Manual page 180

3-52
Instruments and controls/Multi function display
temperature has increased to 58C
(418F) or higher.
! Top display
One of the following items can be dis-
played on the top display.
. Average fuel consumption correspond-
ing to the driving distance of each trip
meter
. Current fuel consumption (This may
not be displayed when driving at a low
speed.)
. Driving range on remaining fuel
For details about the setting of the top
display, refer to Top display setting F3-
72.
NOTE
The driving range on the remaining fuel
is calculated using the average fuel
consumption of the last 30 km (19
miles) driven. This value may be differ-
ent from the values calculated using
the average fuel consumption corre-
sponding to the driving distance of
each trip meter or the current fuel
consumption.
! Clock
The clock can be displayed in either 12-
hour display or 24-hour display. For details
about the setting, refer to Current date
and time setting F3-61.
NOTE
If the vehicle battery is disconnected,
the clock shown in the information bar
will be reset. Set the time again after
the vehicle battery is connected. For
details about the setting, refer to "Top
display setting" F3-72.
! Boost pressure + accelerator
opening ratio screen
1) Boost pressure (digital display)
2) Boost pressure (analog display)
3) Accelerator opening ratio (digital display)
4) Accelerator opening ratio (analog dis-
play)
5) The peak value of the boost pressure
(digital display)
6) The peak value of the boost pressure
(analog display)
This screen displays the boost pressure,
the accelerator opening ratio and the peak
value of the boost pressure in both digital
and analog format. The peak value of the
boost pressure is also stored if the ignition
switch is turned to the ACC or LOCK /
OFF position.