Rear Fog Light (If Equipped) - Subaru WRX-STI Owner's Manual

11-54
Maintenance and service/Replacing bulbs
3. Turn the bulb socket counterclockwise
and pull out the socket.
4. Pull the bulb out of the socket.
5. Install a new bulb.
6. Reinstall the bulb socket and the trunk
lid trim.
& Rear fog light (if equipped)
WARNING
Do not touch the exhaust pipe.
Touching the exhaust pipe may
cause burns.
1. Remove the clips from the rear bum-
per with a flat-head screwdriver.
2. While pulling open the center rear
bumper, turn the bulb socket counter-
clockwise and remove it.
3. Pull the bulb out of the bulb socket and
replace it with a new one.
4. Install the bulb socket by turning it
clockwise.