Subaru WRX-STI Owner's Manual page 346

the lens surface. If any becomes
attached, remove it immediately.
. Do not expose the camera lens to
any sudden temperature change,
for example, spraying hot water
on it in cold weather.
. Do not apply the water jet of a
high pressure washer to the
camera or the surrounding area
when cleaning the vehicle. The
impact by the strong water pres-
sure may cause the camera to
come off. Also, water may enter
inside the camera and cause a
malfunction.
. If the camera is exposed to any
impact, it may lead to malfunc-
tion of the camera. Have the
camera inspected by your
SUBARU dealer as soon as pos-
sible.
. Do not use a steam cleaner under
any circumstances. Some types
of steam cleaners inject hot
steam.
. The camera surface may be da-
maged by a flying stone.
NOTE
If the camera lens is contaminated, no
sharp image is available. When the
camera is contaminated with water
drops, snow or mud, wash it with water
and wipe away any moisture with a soft
cloth. If it heavily gets dirty, wash it with
a neutral detergent.
Interior equipment/Side View Monitor
6-21