Subaru WRX-STI Owner's Manual page 207

4. Select the preferred language by
operating the or switch, and then
push the button.
5. Select Set by operating the
switch, and confirm the setting by pushing
the button.
6. The system will notify you that the
setting is complete.
! Side View Monitor function setting
(if equipped)
You can select On or Off of a function
that enables the multi function display to
be switched automatically to the Side
View Monitor display when the shift lever
(MT models) or select lever (CVT models)
is set to the R position.
1. Perform the preparation steps accord-
ing to Preparation for screen settings
F3-71.
Instruments and controls/Multi function display
2. Operate the
select the Side View Monitor item, and
then push the
3. Push the
3-79
or switch to
button.
button.
– CONTINUED –