Connecting To A Network; Using Ethernet - Canon IMAGERUNNER 4570 Network Manual

Connecting to a Network

The machine supports TCP/IP, AppleTalk, and NetWare, which enables it to be
used by Windows, Macintosh, UNIX, and Linux computers. It also has a 10Base-T/
100Base-TX connector that can be used on most LANs.

Using Ethernet

Connect the machine's RJ-45 connector to a hub port using a Category 5 twisted
2
pair LAN cable.
100Base-TX Connector
IMPORTANT
•
You cannot use the machine as a repeater, bridge, or gateway.
•
If two or more machines are on an AppleTalk network, they should be switched 'on' 10
seconds or more apart.
2-4 Connecting the Machine to a Computer or Network
PC with
10Base-T Connector
Hub
PC with
Ethernet Cable