Setting Up A Computer For Printing (Windows); Connecting To A Tcp/Ip Network; Installing The Printer Driver And Specifying The Printer Destination Setting - Canon iR 3250 Network Manual

Setting Up a Computer for Printing (Windows)

After you have completed the protocol settings, you are ready to set up each of the computers for
printing.

Connecting to a TCP/IP Network

All computers that use the machine for printing must have TCP/IP client software installed and
must be enabled for TCP/IP network use. For details, refer to the manuals provided with the operat-
ing system.
Installing the Printer Driver and Specifying the Printer
Destination Setting
To print from a computer you must install a printer driver and enter a setting for the printer destina-
tion. The printer destination setting differs depending on the print application used for printing. Use
the following information as a guide to determine the print application you are using, and then per-
form the necessary operations.
NOTE
• When using Windows NT or Windows 2000 over a network, you can set up the print servers to enable
more efficient management of network printers. To set up Windows NT or Windows 2000, install the
printer driver first, then setup the printer servers settings. For setting instructions, see "Print Server Set-
tings," on p. 2-22.
LPD
This is the print application generally used with TCP/IP. Refer to the following to install the printer
driver and to enter the printer destination setting.
Windows 95/98:
Windows NT:
Windows 2000:
RAW
This is a print application used with Windows 2000. It can print at higher speeds than LPD. Refer to
the following to install the printer driver and to enter the printer destination setting.
"LPD/RAW Settings (Windows 2000)" (See p. 2-18.)
IPP
This is a print application that can be used with Windows 95/98/2000. It uses the http protocol to
print using internet/intranet connections. Refer to the following to install the printer driver and enter
the printer destination setting.
2-14 Setting Up a Computer for Printing (Windows)
(See "LPD Settings (Windows 95/98)," on p. 2-15.)
(See "LPD Settings (Windows NT)," on p. 2-16.)
(See "LPD/RAW Settings (Windows 2000)," on p. 2-18.)