Canon IMAGERUNNER 4570 Network Manual page 265

Spooling, 3-65
Stamp, 9-34
Startup Time Settings, 3-51, 9-11
STP, 9-34
Subaddress, 9-34
Subaddress Books, 9-34
Subnet, 9-34
Subnet Mask, 3-6, 9-2, 9-34
Super Fine, 9-34
Super G3, 9-35
Switching hub, 3-28, 3-51, 9-35
T
TCP/IP, 1-8, 1-9, 1-11, 1-12, 9-18, 9-35
TCP/IP client software, 5-11
TCP/IP network, 3-2, 3-53, 5-11
TCP/IP Settings, 3-4, 3-5, 9-2
Apply Settings, 3-20, 3-22, 3-23, 3-24, 9-7
BOOTP, 3-7, 9-2
Certificate Settings, 9-5, 9-6
DHCP, 3-6, 9-2
Discovery Settings, 9-5
DNS Dynamic Update, 3-9, 9-3
DNS Server Settings, 3-8, 9-3
Domain Name, 9-3
First Address, 3-21, 3-24
FTP Print Settings, 3-12, 9-4
Gateway Address, 3-6, 9-2
Host Name, 9-3
IP Address, 3-65, 9-2
IP Address Range Settings, 3-17, 3-21, 3-22,
3-23, 9-7
IP Address Settings, 9-2
IPP Settings, 3-14, 9-4
Last Address, 3-21, 3-24
LPD Banner Page, 3-10, 9-3
LPD Settings, 3-9
Multiple Addresses, 3-21, 3-24
Node Type, 9-3
Permit IP Address(es), 3-19, 3-20, 3-22, 3-23,
9-7
PING Command, 3-27, 9-3
Port Number, 3-17, 9-7
Primary Server (DNS), 9-3
Proxy Settings, 3-17, 9-7
RARP, 3-7, 9-2
RAW Settings, 3-10, 9-3
Receiving MAC Address Settings, 9-7
Reject IP Address(es), 3-20, 3-21, 3-22, 3-24,
9-7
RX/Print Range, 3-19, 9-7
Scope ID, 9-3
Secondary Server (DNS), 9-3
Server Address, 3-17, 9-7
Setting/Browsing Range, 3-22, 3-23, 3-24, 9-7
Single Address, 3-21, 3-23, 3-24
SNTP Settings, 9-4
Subnet Mask, 3-6, 9-2
Use HTTP, 3-16, 9-6
Use PASV Mode for FTP, 9-4
Use Proxy, 3-17
Use Proxy within the Same Domain, 3-17, 9-7
WINS Configuration, 9-3
WINS Resolution, 9-3
WINS Server, 9-3
Telephone Line Type, 9-35
TIFF, 9-35
Tone, 9-35
Transmission Time, 9-35
Tree, 9-9
Tree name, 4-15
TTI, 9-36
TX, 9-36
Types of NetWare print service, 4-4
Bindery mode, 4-4
NDS (Novell Directory Service), 4-4
Queue server mode, 4-4
9
Index 9-45