❑
Press [Off] for <Apply Settings> © press [OK].
The display returns to the IP Address Range Settings screen.
G If you want to restrict the IP addresses of computers on which the
machine setting items can be set or browsed (using the Remote UI
or utility):
❑
On the TCP/IP Settings screen, press [M] or [L] until [IP Address Range
Settings] appears © press [IP Address Range Settings].
❑
Press [Permit IP Address(es)] for <Setting/Browsing Range>.
❑
Press [On] for <Apply Settings> © press [Register].
❑
If you want to store only one IP address, press [Single Address] © enter the IP
address that is to be permitted using
The display returns to the IP Address Range Settings screen.
(numeric keys) © press [OK].
-
Protocol Settings
3
3-23