3
7
8
9
The e-mail/I-fax settings are complete.
3-50
Protocol Settings
IMPORTANT
If the SMTP host does not support the encryption, data is not encrypted when [On]
is selected for <Allow SSL (SMTP Send)>.
❑
Press [OK].
The display returns to the E-mail/I-Fax screen.
G If you are using an SMTP server that does not require authentication
for sending e-mail:
❑
Press [SMTP Server] © enter the SMTP server IP address or name using the
keyboard on the touch panel display.
Input Example : IP address: 192.168.1.1
Name: smtp.organization.company.com
❑
Press [Authent./Encryption] © press [Off] both for <SMTP Authentication
(SMTP AUTH)> and <POP Authentication before Sending>.
❑
Press [OK].
The display returns to the E-mail/I-Fax screen.
Confirm the settings you entered © press [OK].
Press [Done] repeatedly until the Additional Functions screen
closes.
Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.