2
5
The port settings are complete.
5-16
Setting Up a Computer for Printing/Sending a Fax
Install the driver.
Install the driver according to the following procedures indicated in the manual
for each driver. (The UFR II printer driver is not available for Windows NT.)
•
If you want to use the PCL printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in
the PCL Driver Guide.
•
If you want to use the PS printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in
the PS Driver Guide.
•
If you want to use the UFR II printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in
the UFR II Driver Guide.
•
If you want to use the fax driver
See the procedure for standard installation in Chapter 2, "Getting Started," in
the Fax Driver Guide.
When the dialog box for selecting the port appears during installation, click [Use
Network Printer] © [Settings]. From the list, select [Workgroup], [Server], and
[Printer] you set in "SMB and WINS Settings," on p. 5-4.