Canon IMAGERUNNER 4570 Network Manual page 56

3
14
3-10 Protocol Settings
❑
Press [On].
❑
If you want to print a banner page (the print job must be set to output a
banner), press [On]; otherwise, press [Off].
Output of a banner page is set on a print-job basis. Even if [On] is selected for
[LPD Banner Page], a banner page cannot be output for a print job, when it is
not set to output.
❑
Confirm the settings you specified © press [OK].
The display returns to the TCP/IP Settings screen.
G If you do not want to use LPD as the print application:
❑
On the TCP/IP Settings screen, press [M] or [L] until [LPD Settings] appears
© press [LPD Settings].
❑
Press [Off].
❑
Confirm the settings you specified © press [OK].
The display returns to the TCP/IP Settings screen.
Specify the Raw settings.
G If you want to use Raw as the print application:
❑
On the TCP/IP Settings screen, press [M] or [L] until [RAW Settings] appears
© press [RAW Settings].
❑
Press [On].