Windows Nt 4.0 - Canon IMAGERUNNER 4570 Network Manual

Hide thumbs Also See for IMAGERUNNER 4570:
Table of Contents

Advertisement

IMPORTANT
To use [Full computer name], which was confirmed in step 4, as the host name for
[Host Name] as shown in the above example, it is necessary to use a DNS server.
(This applies even if the machine and the FTP server are in the same subnet.) If no
DNS server is available, the host name setting should be specified using the IP
address of the FTP server.
Up to 128 alphanumeric characters can be entered for both [Host Name] and [File
Path] on the control panel.
If you switch the language of the touch panel display, [Host Name] and [File Path]
may not be displayed correctly.
If the FTP port number is set to a value other than 21, specify the following for
[Host Name]:
<IP address of FTP server>:<Port number>
Example: 192.168.1.21:21000
NOTE
For instructions on how to specify recipient address settings, see Chapter 2, "Basic
Sending Methods," in the Sending and Facsimile Guide.
The settings for sending data to the FTP server are complete.

Windows NT 4.0

IMPORTANT
It is recommended that Windows NT Server 4.0 be configured by the network manager.
The use of Windows NT Server as an FTP server requires the installation of Microsoft
Internet Information Server 4.0 (IIS 4.0). If IIS 4.0 is not installed in your computer, you
will need to install IIS 4.0 before entering these settings. For installation procedures, see
the manuals provided with your operating system.
Verification of users for access to FTP servers is performed by referencing the local
account database of Windows NT 4.0 Server that is used as the FTP server. Therefore, it
is not possible to use the account of a domain user registered in Windows NT 4.0 Server
to send data directly from the machine to FTP servers in other domains.
This section describes the procedures for using the default home directory under [Default
FTP Site]. To use other settings, enter the FTP site and home directory by referring to the
manual for IIS 4.0.
Setting Up a Computer as a File Server
3
3-79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner 2270Imagerunner 3570Imagerunner 2870

Table of Contents