Canon IMAGERUNNER 4570 Network Manual page 106

3
11
The installation of the driver and the port settings is complete.
3-60 Setting Up a Computer for Printing/Sending a Fax (Windows/UNIX)
❑
Click [LPR] under [Protocol] © enter a print queue in [Queue Name] under
[LPR Settings] © click [OK].
For Windows 2000
You can specify a print queue in [Queue Name]. The following three print
queues are available:
•
LP
The machine prints according to its spool settings. Normally, <LP> is
entered as a print queue.
•
SPOOL
The machine prints only after spooling a print job on the hard disk,
regardless of its spool settings.
•
DIRECT
The machine prints without spooling a print job on the hard disk, regardless
of its spool settings.
NOTE
If you are using Raw, this step is not required.
Click [OK].