7
Press [Done].
The display returns to the Certificate Settings screen.
8
Press [Done].
The display returns to the TCP/IP Settings screen.
9
Press [Done] repeatedly until the Additional Functions screen
closes.
10
Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
The procedure for registering CA certificates is complete.
Editing a CA Certificate
You can confirm the settings of registered CA certificates. You can also erase
unnecessary CA certificates.
1
(Additional Functions) © [System Settings] ©
Press
[Network Settings].
2
Press [TCP/IP Settings].
The TCP/IP Settings screen is displayed.
3
Press [M] or [L] until [Certificate Settings] appears © press
[Certificate Settings].
The Certificate Settings screen is displayed.
Protocol Settings
3-41
3