Canon IMAGERUNNER 4570 Network Manual page 59

❑
Press [Password] to enter the login password for access to the FTP server.
❑
Confirm the settings you specified © press [OK].
The display returns to the TCP/IP Settings screen.
IMPORTANT
•
If you do not specify [User] and [Password], all user names and passwords will be
valid.
•
The password will appear in the job list as a user name if you enter "anonymous"
as a login user name for access to an FTP server without specifying [User] and
[Password], or if you enter "anonymous" in [User]. (To display the job list, press
[System Monitor] © [Print] © [Log] on the touch panel display.)
•
The port number is 21 and cannot be changed.
G If you do not want to use FTP as the print application:
❑
On the TCP/IP Settings screen, press [M] or [L] until [FTP Print Settings]
appears © press [FTP Print Settings].
❑
Press [Off] for <Use FTP printing>.
❑
Confirm the settings you specified © press [OK].
The display returns to the TCP/IP Settings screen.
17
Specify the PASV mode for FTP.
IMPORTANT
Whether you use the PASV mode for FTP depends on the network environment
you are using and the settings of the file server you are sending to. Before
specifying the PASV mode for FTP, consult your network administrator.
❑
On the TCP/IP Settings screen, press [M] or [L] until [Use PASV Mode for
FTP] appears © press [Use PASV Mode for FTP].
Protocol Settings 3-13
3