Adj Rfc Operation; Photometric Chart - ADJ COB Cannon Wash DW User Instructions

COB Cannon Wash DW

ADJ RFC Operation

COB Cannon Wash DW

Photometric Chart

The ADJ RFC remote (sold seperately) has many different functions and
allows you to control your COB Cannon Wash DW from long distance.
The ADJ RFC remote can control your system up to 150 ft. To use the
RFC you must first activate the fixtures receiver, to activate the receiver
please see the instructions on page 14.
BLACkOUT - Pressing this button will blackout the fixture. Press this
button for more then 3 seconds to activate default mode. All modes will
return to their default settings.
AUTO RUN - This button lets you cycle through color fade mode, color
change mode, and auto run mode. Each press of the button will change
to the next mode. Color fade mode and color change mode have 8 dif-
ferent programs. You can use the "+" and "-" buttons to cycle through
the 8 programs. You can control the speeds of each mode by pressing
the SPEED button and then using the "+" and "-" buttons to adjust the
speed.
SELECTION PROGRAM - Press this button to activate Static Color
mode. Use the "+" and "-" buttons to scroll through the 8 colors. Once
you have found your desired color press the FLASH button to activate
strobing. Use the "+" and "-" buttons adjust the strobe speed.
FLASH - This button will activate the flash (strobe) effect. You can con-
trol the flash speed by pressing the "+" and "-" buttons.
SPEED - Press this button and use the "+" & "-" buttons to adjust the
speed of the color fade mode, color change mode, and auto run.
SOUND ACTIVE - This button activates sound active mode. Use the
"+" & "-" buttons to scroll through the 8 sound active modes. Press the
SOUND ACTIVE button again to access sound sensitivity adjustment.
Use the "+" & "-" buttons to adjust the sound sensitivity level.
R G - Press the "R" button to access Warm White or "G" to access Cold
White. Use the "+" or "-" to adjust the brightness. Press the Flash button
to activate strobing and use the "+" or "-" buttons to adjust the strobe
speed.
"+" and "-" - These buttons are used to adjust the flash rate, auto run
speed, color fade speed, color change speed, sound sensitivity, and
output intensity. These buttons are also used to scroll through the
static colors, color fade modes, color change modes, and sound active
modes.
ADJ Products, LLC - www.adj.com - COB Cannon Wash DW User Manual Page 16 ADJ Products, LLC - www.adj.com - COB Cannon Wash DW User Manual Page 17