ADJ COB Cannon Wash DW User Instructions page 6

COB Cannon Wash DW
System Menu: The display will lock after 30 seconds, press
the MODE button for 3 seconds to unlock.
LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE
button until "don" is displayed, press the UP button to display "doff".
Now the display will disappear after 10s. Press any button to turn
the display on again. Be advised though that the display will turn off
automatically after 10 seconds.
To set the display press the MODE button until "dXX" is displayed.
Use the UP or DOWN buttons to select either:
"don" = LED display on at all times.
"doFF" = LED display shuts off after 10 seconds.
LED Display Inversion:
Follow these instructions to flip the display 180° so that the display
can be read upside down.
1. Plug the fixture in and press the MODE button until "dXX" is dis-
played. "XX" represents either "on" or "oFF".
2. Press the SET UP button until "Stnd" is displayed.
3. Press the UP or DOWN buttons to reverse the display 180°.
Operating Modes:
The COB Cannon Wash DW has five operating modes:
• WW & CW Dimmer Mode - Choose one of the two colors to remain
static or adjust the intensity of each color to make your desired
color.
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs. There are 8 sound active modes.
• Auto Mode - There are 3 Auto Modes to choose from.
• Static Color Mode - There are 64 colors to choose from.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller.
Warm White & Cool White Dimmer Mode:
1. Plug the fixture in and press the MODE button until:
2. When "h.XXX" is displayed you are in Warm White dimming
mode. Press the UP and DOWN buttons to adjust intensity.
ADJ Products, LLC - www.adj.com - COB Cannon Wash DW User Manual Page 10
Operating Instructions COB Cannon Wash DW
3. When "C.XXX" is displayed you are in Cool White dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. After you have adjusted the warm & cool colors to make your
desired color you can then activate strobing by pressing the SET
UP button to enter the Flash (strobe) mode.
5. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).
Sound Active Mode:
In this mode the COB Cannon Wash DW will react to sound, and
chase through the different colors.
1. Plug the fixture in and press the MODE button until "SoXX" is dis-
played. "XX" represents the sound active mode (1-8) currently
displayed.
2. The fixture will now change via sound.
3. Press the SET UP button to adjust the sound sensitivity. "SJ-X"
should be displayed. Use the UP or DOWN buttons to adjust the
sensitivity. "SJ-1" is the lowest sensitivity, "SJ-8" is the highest.
Auto Run Mode:
There are 3 types of Auto Run Modes to choose from; Color Fade,
Color Change, and both modes running together. The running speed
is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either "AFXX",
"AJXX", or "A-JF" is displayed.
• AFXX = Color Fade mode, there are 8 Color Fade modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Fade modes.
• AJXX = Color Change mode, there are 8 Color Change modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running mode press the SET
UP button until "SP.XX" is displayed. When this is displayed you
can adjust the running speed of your desired program. Use the
UP or DOWN button to adjust the speed between "SP.01" (slow-
est) and "SP.16" (fastest). Once you have set your desired running
speed, press the SET UP button to return to your desired Auto
Run Mode.
ADJ Products, LLC - www.adj.com - COB Cannon Wash DW User Manual Page 11
Operating Instructions