10 Setting Up And Configuring The Heartstart Xlt; Connecting/Disconnecting Patient Cables; This Section Describes How To Connect And Disconnect The - Philips HEARTSTART XLT M3500B Instructions For Use Manual

10 Setting Up and Configuring the HeartStart XLT

M3500B HeartStart XLT Defibrillator/Monitor
This chapter describes how to set-up and configure your HeartStart XLT. It
covers:
Connecting Patient Cables
Arranging Accessories in the Carrying Case
Configuring the HeartStart XLT

Connecting/Disconnecting Patient Cables

This section describes how to connect and disconnect the:

Pads Patient Cable
ECG Patient Cable (3- or 5-lead)
SpO Patient Cable
2
10
10-1