Philips HEARTSTART XLT M3500B Instructions For Use Manual page 26

Getting Acquainted
NOTE
2-6
Figure 2-3 AED Mode Display Layout (ECG and SpO
System Message
Momentary Message
ECG
Defibrillation
Soft Keys
In its default configuration, the HeartStart XLT powers on in AED Mode
where voice prompts and user messages are active.
The Incident Timer shows the elapsed time since the HeartStart XLT was
turned on. If the HeartStart XLT is powered on after being off for less than
two minutes, the Incident Timer resumes where it left off. If power is off for
more than two minutes, the Incident Timer resets to zero (
User Message
PAUSE ANALYZE
disabled)
2
ECG Gain
150J
Current Charge
Shocks: 0
Shocks Delivered
00:15:02
Incident Timer
SHOCK
).
Getting Started